Product Description
Plastic centrifuge tubes, glass tubes, steel tubes
1, plastic centrifuge tube
Advantages of plastic centrifuge tube is transparent or translucent, its small hardness, can puncture removed gradient. The disadvantage is easily deformed, poor corrosion resistance to organic solvents, life is short.
Prevent leakage of sample tube has a plastic lid, its role is to prevent leakage of the sample, in particular for radioactive or corrosive samples have time is a very important point; there is a lid is to prevent volatile samples and support tube to prevent tube deformation. Also note that in the selection of this point, they can check whether the lid tight, whether in the test Gaiyan to reach the inverted without leakage;
We all know that plastic centrifuge tube, commonly used materials are polyethylene (PE), polycarbonate (PC), polypropylene (PP), etc., wherein polypropylene PP tube performance is relatively good, so we in the selection of plastic centrifuge possible consideration of polypropylene plastic centrifuge tube when the tube.
2, a glass tube
When using glass centrifugal force should not be too large, need to pad rubber pad to prevent pipe crushing, high-speed centrifuges generally do not use glass. Tube lid closed is not good enough, the liquid will not fill (and the use of high-speed centrifuge for angle rotor) to prevent spills, loss of balance. Spillover effects of pollution of the rotor and centrifugal chamber, the impact sensors work properly. When ultracentrifugation, liquid must fill tube, as required from ultra high vacuum, only fill the tube in order to avoid deformation.
3, steel tubes
The steel tube strength, deformation and can resist heat, frost resistance, chemical resistance, its application is quite extensive but using the same should also avoid contact with corrosive chemicals, such as acids, alkalis and the like. Try to avoid corrosion of these chemicals.
1. Volumn:
0.6ml, 1.5ml, 2.0ml,
2.Type:
Microcentrifuge Tubes: universal, non-sterilized
low retention, non-sterilized
Screw Cap Tubes:individual-bottom
V-bottom
Sample Tubes:universal, non-sterilized
low retention, non-sterilized
8 Strip Sample tubes: universal, non-sterilized
low retention, non-sterilized
Seal Mats for Sample tubes: universal, non-sterilized
3.Features:
♦Glass-like transparent tubes are available in seven additional colours.
♦Snap-lock tubes are guaranteed to stay closed, even during boiling or autoclaving.
♦Withstand up to 20,000 RCF.
♦ Snap-lock cap ensures efficient seal, yet is easy to 'flip' open.
♦Thin membrane in the caps centre allows easy piercing by syringe needle.
♦Certified RNase, DNase, protease and endotoxin-free for total sample integrity.
♦Apparent scale identification to facilitate control of liquid volume.
Please contact us for more details.
Plastic centrifuge tubes, glass tubes, steel tubes
1, plastic centrifuge tube
Advantages of plastic centrifuge tube is transparent or translucent, its small hardness, can puncture removed gradient. The disadvantage is easily deformed, poor corrosion resistance to organic solvents, life is short.
Prevent leakage of sample tube has a plastic lid, its role is to prevent leakage of the sample, in particular for radioactive or corrosive samples have time is a very important point; there is a lid is to prevent volatile samples and support tube to prevent tube deformation. Also note that in the selection of this point, they can check whether the lid tight, whether in the test Gaiyan to reach the inverted without leakage;
We all know that plastic centrifuge tube, commonly used materials are polyethylene (PE), polycarbonate (PC), polypropylene (PP), etc., wherein polypropylene PP tube performance is relatively good, so we in the selection of plastic centrifuge possible consideration of polypropylene plastic centrifuge tube when the tube.
2, a glass tube
When using glass centrifugal force should not be too large, need to pad rubber pad to prevent pipe crushing, high-speed centrifuges generally do not use glass. Tube lid closed is not good enough, the liquid will not fill (and the use of high-speed centrifuge for angle rotor) to prevent spills, loss of balance. Spillover effects of pollution of the rotor and centrifugal chamber, the impact sensors work properly. When ultracentrifugation, liquid must fill tube, as required from ultra high vacuum, only fill the tube in order to avoid deformation.
3, steel tubes
The steel tube strength, deformation and can resist heat, frost resistance, chemical resistance, its application is quite extensive but using the same should also avoid contact with corrosive chemicals, such as acids, alkalis and the like. Try to avoid corrosion of these chemicals.
1. Volumn:
0.6ml, 1.5ml, 2.0ml,
2.Type:
Microcentrifuge Tubes: universal, non-sterilized
low retention, non-sterilized
Screw Cap Tubes:individual-bottom
V-bottom
Sample Tubes:universal, non-sterilized
low retention, non-sterilized
8 Strip Sample tubes: universal, non-sterilized
low retention, non-sterilized
Seal Mats for Sample tubes: universal, non-sterilized
3.Features:
♦Glass-like transparent tubes are available in seven additional colours.
♦Snap-lock tubes are guaranteed to stay closed, even during boiling or autoclaving.
♦Withstand up to 20,000 RCF.
♦ Snap-lock cap ensures efficient seal, yet is easy to 'flip' open.
♦Thin membrane in the caps centre allows easy piercing by syringe needle.
♦Certified RNase, DNase, protease and endotoxin-free for total sample integrity.
♦Apparent scale identification to facilitate control of liquid volume.
Please contact us for more details.